Pr3sT0

1.First you go to start down in the bottom left look around on the start menu and find search.

2.Click search and type in CMD.

3.Once you type that in the command prompt will pop up.

4.Then right where your cursor is type this exactly: Ipconfig/release

5.Once you type that in your internet connection will be released or just put away at the moment no worries you will get it back.

6.Now leave everything open you had before and go to the start button again and click my computer

7.Once you click that another window opens and then you right click my network places and click properties.

8.You now have all of your connections in front of you.

9. Right click the one that is disconnected and or the one you usually are on. and then click properties again.

10.Look down the list for Internet protocol (TCP/IP) Once you find it double click it and choose the marker to use the following IP address.

11.Then change it to whatever you want but make it under 200 for every spot in the IP.

12.Now click on subnet mask and click tab and make sure it stays that way and leave default gateway alone or blank.

13.Then click ok (were not done yet) Now you can check your IP with command prompt by typing in just ipconfig.

14.But if you want to get your interenet connection working again follow this.

15.Go back to my network places right click it go to properties again.

16.Right click on the connection you did before and click properties again.

17.Then check obtain an IP address automatically. then select ok and Ta da Your IP Address has been changed to what you wanted it to be!

This is helpful to connecting to xbox live on your banned jtag


Here are all the downloads you will need to have to switch your key vault

Flash 360.XEX- http://www.megaupload.com/?d=P1TYZOTM

360 Flash Tool- http://www.megaupload.com/?d=68GBAFIK


Here are the Physical items you will need

Jtag console
USB with over 1GB of memory


After you are done downloading the programs needed, place them on the root of your USB ( The first page that pops up when you open it)

Now just follow these steps and let me know if anybody has any issues

1- Place your USB, with flash360 and 360flashtool on it, into your JTAG console
2- Power on your console and navigate to xex menu and open it
3- use the Right Bumber on you controller to navigate to the USB tab
4- Click on flash360 and it should direct you to a blue screen with small words on it
5- click "x" to write the original NAND of your xbox to your USb. (follow the rest of the instructions for it to begin)
6- Remove your USB from your xbox and place it into your computer
7- The Original NAND of your JTAG should have saved as flashdmp.bin

1- Double click on 360 Flash tool
2- Browse for the flashdmp.bin file on USB and open it with 360 flash tool
3- click the keys tab a the top of the screen and make sure the two top boxes are check marked
4- Next, write in the CPU key of your JTAG where it says "CPU" ( To get this code power off your JTAG, then hit the eject button on the disc tray. After the screen has stopped moving your CPU key should be there)
5- After you have typed in your CPU key click "ok" and everything should dissapear.
6- Open the flashdmp.bin file with 360 flash tool again and all of your Console information should be listed below
7- Take note of your DVD key and DVD drive type because you will need it later.

1- Next click the "import" button and select "key Vault"
2- Browse for the KV_dec.bin file you should have saved on your desktop (thats the new unbanned KV)
3- Save that as "edit01.bin"
4- Open edit01.bin in 360 flash tool
5- Then click the patch button on the bottom left and hit "patch Key Vault"
6- (This is where your DVD key and Drive Type comes in handy) Then copy your DVD key and look for your Drive type in the scroll box. *Note- If you do not do this your JTAG could be damaged
7- Then lastly, save that file as "updflash.bin"

FINAL STAGE
1- Place the updflash.bin file onto the root of your USB
2- Place the USB into your JTAG and direct yourself to xexmenu
3- once you are in xexmenu browse in the USB tab for 360 Flash tool
4- Hit "A" to rewrite you current NAND
5- Hit "B" to rewrite you NAND without keeping your current KV
6- Hit "Start" to allow a mismatch to occur (sometimes you have to hit start twice)
7- Then Finally hit "A" to continue on with the procedure
8- Hit any button to continue
9- Then hit the "Back" button twice to reboot your JTAG


You should finally be unbanned and ready to host