Tutorial: How to install lights in your console

[xXxStevenxXx]

By Lethal_NFS if xbox360forum

Alot of people are afraid to install LEDs because they dont know where to solder the wires or are just plain afraid to kill their 360. Its actually very easy to do. Here is a little tutorial for you to follow.

 

Items Needed

1. Soldering Iron

2. Solder

3. Electrical Tape

Your wires will either be BLACK and RED or BLACK and YELLOW.

 

On the picture below you will see where I soldered the black and yellow wires. Now if you have a red wire you will want to solder it where I placed the red dot on the right. All soldering is done on the back of the motherboard. After you solder the wires to the board make sure you cover them with the electrical tape.

 

http://img127.imageshack.us/img127/1589/solderhs2.jpg

 

Yellow=12v

Red=5v

Black=ground

 

After you are done you should have something like this.

 

http://img364.imageshack.us/img364/6469/minelittf7.jpg

[Decatur]

no offence but wtf kind of tutorial is that?

 

 

im not prepared to do that!

[Slidell]

i cant even see the pic and dosent seem very indepth

[dschu012]

Whatever is in his xbox is not a LED in that picture.

[Korupt Data]

wow this is a lame arse tut O____o and not very safe. i wouldnt recommend doing this.