Jump to content

cbox


The easiest way to turn your green led to red


Recommended Posts

Posted

The easiest way to turn your green led to red (without taking off the front panel) (v0.1)

 

Tutorial written by : Bobert Hepker

 

STEP 1

 

Open your Xbox and remove the hard drive and dvd drive.

 

 

 

STEP 2

 

Locate the group of yellow wires next to the group of large multi-colored wires (the power connector for the mainboard). This is near the front of the Xbox and slightly off center to the right.

 

 

 

STEP 3

 

Unplug the yellow wires from the mainboard.

 

 

 

STEP 4

 

Grab a magnifying glass and locate wires 5,6,7, and 8. (Hint: Wire 1 is marked with a 1 and an arrow below it. Wire 2 is marked with a 2 and is on the opposite side. Wire 3 is beside wire 1.)

 

 

 

STEP 5

 

Use a needle to gently pry back the tiny plastic tab that keeps the wire from coming out, then pull out the wire. You need to switch wires 7 and 8, then switch wires 5 and 6. Do not pull out all four wires at the same time because that can easily lead to confusion.

 

 

 

STEP 6

 

After you have switched the proper wires, plug the wire back into the mainboard. Wire 1 (marked with the arrow) will line up with pin 1 on the mainboard witch is also marked with an arrow. Put the hard drive and dvd drive back in place. Put the case back together and your done.

 

 

 

STEP 7

 

Enjoy the evil glow of your XBOX's red led.

 

 

 

STEP 8

 

Play Colin McRae Rally 3.

 

 

Tutorial written by : Bobert Hepker

  • 5 months later...
Posted
This tutorial is for the xbox 1 and there is even a easier way. Just softmod the xbox, put xbmc on it and then go to settings and change the LED to red :p

 

Why play colin mcrea rally?

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...