iBotModz_Bot Posted November 26, 2010 Report Posted November 26, 2010 Maximus released an UART Enable Patch for C4E's iXtreme LT+ FW for LiteOn drives on psx-scene.com that will allow you to read the DVD-key again on LiteOn drives flashed with LT+ without having to cut/repair extra traces. From the README/NFO:WHAT IT IS:Silly patch to re-enable the READ KEYS OVER SERIAL On LT+This will save you from having to do (or re-do) the cuts on the drives or also will save you of being FORCED to install board clips of any kind on your drive to do later reads. (of course if its a 83V2 or 93 stock drive you still need do cuts the first time)Since the releases are based on the 93450 its possible with a really quick patch re-enable that functionality. It should work for all LT+ releases of liteon as all are based on the 93450 fw.Please note will not work on non-93450 based firmwares. HOW TO APPLYa) Prepare your LT+ file (with the spoof, keys, etc) but dont flash it just yet.b) Open LT+ file with ppf-o-matic and apply the attached ppf file.c) After ppf applied just flash your drive and you will have later the option to read keys over the UART port (just like old Liteon 74) using spear or Usbxtractor, whatever Alternatively you can also patch the template files to avoid doing each time. If JF complains about opening the patched firmware just use an older (without restrictions) version or better use dosflash Thanks to geremia for the firmware descrambler. The software is being distributed with an "I dont care" license so use at your own risk. Official Site: http://maximusgames.netDownload: hereNews-Source: psx-scene.comhttp://feedads.g.doubleclick.net/~a/VM_mS7fWp9k59IQCnsDIr5mDr0M/0/dihttp://feedads.g.doubleclick.net/~a/VM_mS7fWp9k59IQCnsDIr5mDr0M/1/di View the full article
Recommended Posts
Archived
This topic is now archived and is closed to further replies.