How to change led colour in a play and charge kit.

[jmdalmighty]

Items required; 

Play and charge kit

2 different coloured 0603 LEDs 

Soldering iron 

<2.0 flat head screwdriver

 

 

First of remove the cover use your flat head or equivalent (I used a blunt pair of  scissors) be careful not to damage the plastic work you way around the edges.

http://i863.photobucket.com/albums/ab196/surkhab/fc65368a.jpg

 

Once opened you need to remove those two screws. 

http://i863.photobucket.com/albums/ab196/surkhab/378ce9cc.jpg

 

Now remove the plastic guard to show the led. 

http://i863.photobucket.com/albums/ab196/surkhab/b87c77e6.jpg

 

Remove the led by bridging both sides and the apply heat to both sides to float the led off. 

http://i863.photobucket.com/albums/ab196/surkhab/9a0d913e.jpg

 

Put ur new LEDs on the polarity is on the board. The top is the charging( origanaly red, bottom was green, charged) H3&J1 are +

http://i863.photobucket.com/albums/ab196/surkhab/c31061cc.jpg

 

Give it a quick test and if you did it correctly it shuld work. 

http://i863.photobucket.com/albums/ab196/surkhab/bd00a892.jpg

 

Final product. 

http://i863.photobucket.com/albums/ab196/surkhab/c9bfbb9e.jpg

 

By Jmd Almighty.