My 360 hadware mods

[Dog5point0]

Dog5point0's Xbox Mods

 

Start:

This all started when my disk tray broke and wont read disks anymore so i ripped it apart and cleaned it all up then it worked for about a month but it stopped working again so i opened it once again and tryed some more things to it nothing worked so i said to my self **** this im buying a new drive and putting some sick shit in it.

 

http://i50.tinypic.com/avh3x2.jpg

 

Update 1:

Window time, designing my custom Kink BMX window. There will be a window cut out and in the center of it will be a Kink logo

 

http://i49.tinypic.com/oqewrt.jpg

 

Under the window i will have it light with Blue LED lights

 

http://i47.tinypic.com/1ylv7n.jpg

 

forgot to say im also gunna fill the xbox 360 text logo thing on the side so its a flush finish

 

Tons of credit to my friend Aaron for freehand drawing the kink logo for me, i will be cutting it tomorrow i hope i will post updates as they happen

 

Tell me what you think, or let me know if you have any ideas for me

 

Update 2: http://www.ibotmodz.net/forum/topic/17274_my_360_hadware_mods/page__view__findpost__p__111908

Update 3: http://www.ibotmodz.net/forum/topic/17274_my_360_hadware_mods/page__view__findpost__p__113001

Edited February 7, 2010 by Dog5point0

[iBotPeaches]

How you cutting it?

 

I wanted to cut my orig xbox, but I had to have someone professionally do it, because none of my tools were precise and sharp enough.

[Dog5point0]

as dumb as it sounds but im bringing it into my school and cutting in with the schools laser cutter with master cam mill 8 iv talked to our teacher and he says that it will be able to do it easy and be able to get into the small cracks with out any issue

[Lethal Nun]

Haha you do the Kink sign I'll do Fit or Redline

[ATTIKIT]

maybe try and sand it down paint it black then redraw the logo and have it so when your console is standing up the logo will be straight just a thought unless you intend to leave it on its side of course.

 

p.s.i have that wristband in the sec pic with the checkers

Edited January 11, 2010 by ATTIKIT

[Dog5point0]

maybe try and sand it down paint it black then redraw the logo and have it so when your console is standing up the logo will be straight just a thought unless you intend to leave it on its side of course.

 

p.s.i have that wristband in the sec pic with the checkers

well i changed my plans a tad bit today me and my friend were talking about it and im going to remove the Kink logo and just etch it into the peice of plexi glass i think that will look better and it will be turned for it to me standing up

and thats actually a bandanna i use for snowboarding lol ^.^

[Lethal Nun]

Your changing it to plexiglass? that might be cool I still want to cut mine friday though

[Dog5point0]

yeah i was always gunna put plexi glass just not the whole window was gunna be that but now it is

[ATTIKIT]

well i changed my plans a tad bit today me and my friend were talking about it and im going to remove the Kink logo and just etch it into the peice of plexi glass i think that will look better and it will be turned for it to me standing up

and thats actually a bandanna i use for snowboarding lol ^.^

 

I love to snowboard I ride a burton but yea plexiglass sounds better maybe some leds to under the etched kink logo. use hot glue

 

but it is your console just a suggestion

Edited January 12, 2010 by ATTIKIT

[Dog5point0]

I love to snowboard I ride a burton but yea plexiglass sounds better maybe some leds to under the etched kink logo. use hot glue

 

but it is your console just a suggestion

i ride a lammar right now but im buying a forum... and i was origanaly gunna do the burton logo but i changed my mind and did a kink logo. im doing the cutting tomorrow and then im going to try and get some plexiglass from home depot, once i get that i will be etching it and gluing it in with my grandpa lol

[Dog5point0]

EDIT UPDATE ADDED TO THE ORIG. POST Edited January 13, 2010 by Dog5point0

[Dog5point0]

Update 2:

Due to me having the flu or some shit the cutting will be delayed til either tomorrow or friday, and now i am unshure of the tools we are using to cut cause i will be doing it with our schools wood shop teacher and not the laser cuttter pictures will be posted in THIS update of the tools and the proses once i get it done and taken home to update the post

Cuts:

 

http://i50.tinypic.com/11kut0n.jpg

 

http://i46.tinypic.com/nb4qid.jpg

 

http://i45.tinypic.com/2vx3twg.jpg

 

http://i45.tinypic.com/dw2czl.jpg

 

http://i45.tinypic.com/jfaxjr.jpg

 

http://i45.tinypic.com/2e33hjs.jpg

 

Sanding it so its flat and getting the plexiglass for it soon

Edited January 16, 2010 by Dog5point0

[Dog5point0]

Update 3:

 

I bought the cd drive and will be flashing it next week most likely, i have just started the painting and have the plexiglass glued in too, i have only primer on it at the moment. but i am painting it flat black.

 

http://i49.tinypic.com/b8vlfp.jpg

 

http://i49.tinypic.com/2rzorqo.jpg

 

http://i50.tinypic.com/2417bb5.jpg

 

http://i50.tinypic.com/4sb147.jpg

 

more pics when i get the black on it =) also buying the Blaster CK3 so the flash is easyer and i dont have to open it everytime i update

 

http://i49.tinypic.com/200cgw3.jpg

 

http://i47.tinypic.com/2rxxteg.jpg

 

http://i50.tinypic.com/f1w6dc.jpg

Edited February 8, 2010 by Dog5point0

[halo3]

cool lol you took my advice

[halo3]

cool lol you took my advice

[Dog5point0]

http://i50.tinypic.com/f1w6dc.jpg

 

finished painted pic of it

[ATTIKIT]

now for t3h etching...

[Dog5point0]

now for t3h etching...

next im instaling a flashed drive and leds then etching