Jump to content

  •  

  • iBotModz CBox


    Photo

    how to softmod with 007


    This topic has been archived. This means that you cannot reply to this topic.
    No replies to this topic

    #1 Maddog6

    Maddog6

      Private

    • Members+

    • 32 posts
    • Joined: 01-September 07

    Posted 14 November 2007 - 10:42 AM

    ok what you need first: a action replay, a xbox, duh, A old version of 007 agent underfire,and,
    a working computer with internet.


    now what you do first is get waffle zone tools which i will have avalibal soon after you get that save burn it to the harddrive because if you try to load it off the memory card it will not work you will get a error messege. oh right before you do that make sure that you dont have any data on that game on your hard drive. ok so NOW pop in james bond and load the save that you just burned on your drive. your screen will go dark and say unleash x. this red dash board will come up and have the following things on it

    boot c dashboard
    waffle zone
    ect.

    now what you do is hit waffle zone tools and at the very top hit install UXE.
    now once you have done this every time you turn your box on this dash will come up at start up. IMPORTANT! YOU DO NEED TO BACK UP EVERYTING THAT IS IMPORTANT ONTO YOUR COMPUTER BEFORE DOING THIS!!!!! anyway, after the install is done it will go into a comand prompt thing and it will say at the end of it that you can turn your box off. NOTE: IF YOUR BOX FREEZES IN THE MIDDLE OF LOADING AND INSTALLING DO NOT TURN OFF YOUR BOX, DONT DO IT WAIT ABOUT 10 MINS AND IF THE GREEN LIGHT STARTS FLASHING LIKE YOU JUST OPENED THE DISK DRIVE THEN ITS FINE. ok now after you got that installed try booting it up without a game in it and if it goes to unleash x then.... WALLA! you succesfully modded your xbox! no unmodding is a diffrent story. to unmod your box go to waffle zone tools and click i think waffle zone settings and then click restore unmodded back up and then your done and then your default dash board will be back to the ms dash on start up!