By Lethal_NFS if xbox360forum
Alot of people are afraid to install LEDs because they dont know where to solder the wires or are just plain afraid to kill their 360. Its actually very easy to do. Here is a little tutorial for you to follow.
Items Needed
1. Soldering Iron
2. Solder
3. Electrical Tape
Your wires will either be BLACK and RED or BLACK and YELLOW.
On the picture below you will see where I soldered the black and yellow wires. Now if you have a red wire you will want to solder it where I placed the red dot on the right. All soldering is done on the back of the motherboard. After you solder the wires to the board make sure you cover them with the electrical tape.
Yellow=12v
Red=5v
Black=ground
After you are done you should have something like this.
[/QUOTE]
iBotModz CBox
Tutorial: How to install lights in your console
Started by xXxStevenxXx, Oct 06 2008 05:43 PM
4 replies to this topic
#1
Posted 06 October 2008 - 05:43 PM
#2
Posted 06 October 2008 - 06:04 PM
no offence but wtf kind of tutorial is that?
im not prepared to do that!
im not prepared to do that!
#3
Posted 06 October 2008 - 07:11 PM
i cant even see the pic and dosent seem very indepth
#4
Posted 21 October 2008 - 01:00 PM
Whatever is in his xbox is not a LED in that picture.
#5
Posted 21 October 2008 - 03:41 PM
wow this is a lame arse tut O____o and not very safe. i wouldnt recommend doing this.