Update: after running it for about an hour its at 28C=82.4F very slightly above room temp :-)
![IMG_2227.JPG](https://ibotmodz.net/forum/uploads/monthly_12_2010/post-129704-0-72026900-1291492932_thumb.jpg)
Edited by XDK, 04 December 2010 - 02:02 PM.
Posted 03 December 2010 - 10:52 PM
Edited by XDK, 04 December 2010 - 02:02 PM.
Posted 04 December 2010 - 04:49 AM
Posted 04 December 2010 - 07:04 AM
I bet he is actually using water to cool it.That's too much just make a internal one it will keep it cool enough.
Posted 04 December 2010 - 08:14 AM
uh have u even looked at the pic? the stuff in the tubing is green!, since when is water green?. I'm using a high quality coolant for this thing, and no lol i didn't want some small internal water cooling, I wanted to go all out with this thing lol.I bet he is actually using water to cool it.
Edited by XDK, 04 December 2010 - 08:20 AM.
Posted 04 December 2010 - 02:03 PM
Posted 04 December 2010 - 03:09 PM
uh have u even looked at the pic? the stuff in the tubing is green!, since when is water green?. I'm using a high quality coolant for this thing, and no lol i didn't want some small internal water cooling, I wanted to go all out with this thing lol.
Posted 04 December 2010 - 04:13 PM
Yeah koolance does, have u seen the price!? sure it may not as small but its far better then koolances kit, i went all out making sure this thing was extreme.Get ready to cry.
That is one of the messiest Water Cooling jobs I have seen. Green UV coolant is hmm.. last I checked, $4.95 a bottle? Koolance has a kit available, although the Rad is still a bit large (http://www.koolance....?product_id=328). Quite frankly, you could probably use a fairly low power rad instead, as the 360 is a decently low heat device. Tbh, I don't even think water cooling is nessesary for a 360, if yours is heating up, do what many do and add a fan to the 360.
/endrant
Posted 04 December 2010 - 05:09 PM
Posted 04 December 2010 - 05:18 PM
yeah while one leak and you done, my coolant is board safe, still never good if it leak tho XD but i got hose clams, pipe selant, i got it all, and there is no leaksDisteld water is better than most coolant.
Posted 04 December 2010 - 05:41 PM
The xbox was "done" as soon as you bought it.yeah while one leak and you done, my coolant is board safe, still never good if it leak tho XD but i got hose clams, pipe selant, i got it all, and there is no leaks
Posted 04 December 2010 - 06:31 PM
Yeah koolance does, have u seen the price!? sure it may not as small but its far better then koolances kit, i went all out making sure this thing was extreme.
yeah while one leak and you done, my coolant is board safe, still never good if it leak tho XD but i got hose clams, pipe selant, i got it all, and there is no leaks
The xbox was "done" as soon as you bought it.
Distilled water is not a conductor.
Posted 04 December 2010 - 11:28 PM
I didn't make this thing to be portable, i made it for resultsYeah, but then again, its small enough to be portable. Post l/m and we'll see if its better.
Hose Clamps.. like the ones I used to fix my trucks rad today? You shouldn't need them, with nozzles.
^This
Edited by XDK, 04 December 2010 - 11:29 PM.
Posted 13 December 2010 - 07:20 PM
Posted 13 December 2010 - 08:40 PM
bump
Posted 14 December 2010 - 11:27 AM
wont b long.I still wish he was banned again.
Posted 15 December 2010 - 06:58 PM
i wouldnt count on thatwont b long.
Posted 15 December 2010 - 07:22 PM
Posted 16 December 2010 - 05:21 PM
well thx
Posted 16 December 2010 - 06:45 PM
wont b long.