13 replies to this topic

[halo3]

I can't rember but I looked it up when I first checked and it said it needs a ram reflow

its probably 0031 since its rrod and 90%+ of the time its a dead ram which needs to be replaced.... so its a peice of crap =-P ppl dont buy the broken one
btw look at the screws on the jtagable, its been x-clamped, so it won't last long and so have fun with it

Edited by halo3, 22 May 2010 - 08:14 PM.

[jmdalmighty]

Will thanks but there a diffrence between dead ram chips and it need to be reflowed and whare as the xclamp fix goes that xbox has been reflowed and the xclamps added so the mobo dosent bend and brake the solder points again for such a profencial repair man you don't seem to know much

[halo3]

Will thanks but there a diffrence between dead ram chips and it need to be reflowed and whare as the xclamp fix goes that xbox has been reflowed and the xclamps added so the mobo dosent bend and brake the solder points again for such a profencial repair man you don't seem to know much

Just becuase some site said it needed a reflow doesn't mean it's true, 0031 is almost always a dead ram chip, sorry. Btw a heatgun reflow is the worst reflow out there and also causes major flexing + ontop of that you add in the x-clamp which bends the board so much, lol it doesn't prevent bending at all, what idiot started that anyways!? So altogether you got just about the worst repair possible on this thing (well besides the penny trick+overheating)

Edited by halo3, 22 May 2010 - 10:35 PM.

[jmdalmighty]

Wow you presumed it's a heatgun reflow but it's not it's been reflowed in a rework meachine for $30 and I added the xclamp fix so it dosent bend the board and brake the solder again and whare as the second xbox goes the xbox will turn on and wok fine 25% of the time so the chips aren't dead they need to be reflowed so gtfo my shop unless your next post is a serious offer

[halo3]

Wow you presumed it's a heatgun reflow but it's not it's been reflowed in a rework meachine for $30 and I added the xclamp fix so it dosent bend the board and brake the solder again and whare as the second xbox goes the xbox will turn on and wok fine 25% of the time so the chips aren't dead they need to be reflowed so gtfo my shop unless your next post is a serious offer

Since you x-clamped it I assumed you heatguned it because obviously you have no idea how to repair a 360. Dude the x-clamp is one of the worst repairs out there for so many reasons and it doesn't prevent flexing at all lol it causes a huge amount of flexing and damage(might as well towel trick it same end result). Also why didn't you say it started up 25% of the time? lol because everyones going to think it's a dead ram.

[jmdalmighty]

Will there you go the console is not dead and whare as the xclamp trick goes I did a hybrid version so it dosent bend I sanded down the things that hold the mb up to all 3mm so that's it's perfectly even.

[halo3]

Will there you go the console is not dead and whare as the xclamp trick goes I did a hybrid version so it dosent bend I sanded down the things that hold the mb up to all 3mm so that's it's perfectly even.

good, but lol you got to say these things they increase the value.

[Decatur]

Just becuase some site said it needed a reflow doesn't mean it's true, 0031 is almost always a dead ram chip, sorry. Btw a heatgun reflow is the worst reflow out there and also causes major flexing + ontop of that you add in the x-clamp which bends the board so much, lol it doesn't prevent bending at all, what idiot started that anyways!? So altogether you got just about the worst repair possible on this thing (well besides the penny trick+overheating)

Well, with your 2 weeks experience, I can't help believe you. Especially with your remarkable grammar.

[halo3]

Well, with your 2 weeks experience, I can't help believe you. Especially with your remarkable grammar.

2 week experiance lol no it's been about 7 months since I opened up repairs online, but i was doing it localy for some time before that, and yeah I'm going to care about grammer on an online forum in a topic that really doesn't matter at all...

[jmdalmighty]

Let's stop flamming shall we no more off topic questions, now the next post better be an offer or question about the products

[Decatur]

2 week experiance lol no it's been about 7 months since I opened up repairs online, but i was doing it localy for some time before that, and yeah I'm going to care about grammer on an online forum in a topic that really doesn't matter at all...

lol, your grammar ruins your credibility, are you dumb? Seriously are you?

[Lockon]

grammar is everything in the real world, The business world.

[gruntmods]

2 week experiance lol no it's been about 7 months since I opened up repairs online, but i was doing it localy for some time before that, and yeah I'm going to care about grammer on an online forum in a topic that really doesn't matter at all...

honestly, just leave, all you do on this site is sell shit.

[iBotPeaches]

Guess my lock failed.

Locked.