17 replies to this topic

[Dog5point0]

Dog5point0's Xbox Mods

Start:
This all started when my disk tray broke and wont read disks anymore so i ripped it apart and cleaned it all up then it worked for about a month but it stopped working again so i opened it once again and tryed some more things to it nothing worked so i said to my self **** this im buying a new drive and putting some sick shit in it.



Update 1:
Window time, designing my custom Kink BMX window. There will be a window cut out and in the center of it will be a Kink logo



Under the window i will have it light with Blue LED lights



forgot to say im also gunna fill the xbox 360 text logo thing on the side so its a flush finish

Tons of credit to my friend Aaron for freehand drawing the kink logo for me, i will be cutting it tomorrow i hope i will post updates as they happen

Tell me what you think, or let me know if you have any ideas for me

Update 2: http://www.ibotmodz....post__p__111908
Update 3: http://www.ibotmodz....post__p__113001

Edited by Dog5point0, 07 February 2010 - 01:55 PM.

[iBotPeaches]

How you cutting it?

I wanted to cut my orig xbox, but I had to have someone professionally do it, because none of my tools were precise and sharp enough.

[Dog5point0]

as dumb as it sounds but im bringing it into my school and cutting in with the schools laser cutter with master cam mill 8 iv talked to our teacher and he says that it will be able to do it easy and be able to get into the small cracks with out any issue

[Lethal Nun]

Haha you do the Kink sign I'll do Fit or Redline

[ATTIKIT]

maybe try and sand it down paint it black then redraw the logo and have it so when your console is standing up the logo will be straight just a thought unless you intend to leave it on its side of course.

p.s.i have that wristband in the sec pic with the checkers

Edited by ATTIKIT, 11 January 2010 - 09:18 AM.

[Dog5point0]

maybe try and sand it down paint it black then redraw the logo and have it so when your console is standing up the logo will be straight just a thought unless you intend to leave it on its side of course.

p.s.i have that wristband in the sec pic with the checkers

well i changed my plans a tad bit today me and my friend were talking about it and im going to remove the Kink logo and just etch it into the peice of plexi glass i think that will look better and it will be turned for it to me standing up
and thats actually a bandanna i use for snowboarding lol ^.^

[Lethal Nun]

Your changing it to plexiglass? that might be cool I still want to cut mine friday though

[Dog5point0]

yeah i was always gunna put plexi glass just not the whole window was gunna be that but now it is

[ATTIKIT]

well i changed my plans a tad bit today me and my friend were talking about it and im going to remove the Kink logo and just etch it into the peice of plexi glass i think that will look better and it will be turned for it to me standing up
and thats actually a bandanna i use for snowboarding lol ^.^

I love to snowboard I ride a burton but yea plexiglass sounds better maybe some leds to under the etched kink logo. use hot glue

but it is your console just a suggestion

Edited by ATTIKIT, 11 January 2010 - 08:48 PM.

[Dog5point0]

I love to snowboard I ride a burton but yea plexiglass sounds better maybe some leds to under the etched kink logo. use hot glue

but it is your console just a suggestion

i ride a lammar right now but im buying a forum... and i was origanaly gunna do the burton logo but i changed my mind and did a kink logo. im doing the cutting tomorrow and then im going to try and get some plexiglass from home depot, once i get that i will be etching it and gluing it in with my grandpa lol

[Dog5point0]

EDIT UPDATE ADDED TO THE ORIG. POST

Edited by Dog5point0, 13 January 2010 - 12:31 PM.

[Dog5point0]

Update 2:
Due to me having the flu or some shit the cutting will be delayed til either tomorrow or friday, and now i am unshure of the tools we are using to cut cause i will be doing it with our schools wood shop teacher and not the laser cuttter pictures will be posted in THIS update of the tools and the proses once i get it done and taken home to update the post

Cuts:













Sanding it so its flat and getting the plexiglass for it soon

Edited by Dog5point0, 16 January 2010 - 05:34 PM.

[Dog5point0]

Update 3:

I bought the cd drive and will be flashing it next week most likely, i have just started the painting and have the plexiglass glued in too, i have only primer on it at the moment. but i am painting it flat black.









more pics when i get the black on it =) also buying the Blaster CK3 so the flash is easyer and i dont have to open it everytime i update

Edited by Dog5point0, 07 February 2010 - 09:40 PM.

[halo3]

cool lol you took my advice

[halo3]

cool lol you took my advice

[Dog5point0]

finished painted pic of it

[ATTIKIT]

now for t3h etching...

[Dog5point0]

now for t3h etching...

next im instaling a flashed drive and leds then etching