Find content
Male
Quote
xk3y Gecko have been out for some time now and today we release a small update for the Gecko Windows App.
What's new/fixed:
* Bug fix for XGD3 rips
* About Box
Complete feature list
Official Site: http://xk3y.com
View the full article
Topics I've Started
x360Glitchip v2 and 360gcProg v1.4
28 March 2012 - 08:44 PM
From x360glitchip.com:
We are proud to tell you that the x360Glitchip v2 is ready to be sold.
List of features :
* 2 LEDs :
-LED RED : Your chip is empty
-LED Strong RED : Your chip is flashed with Xenon timing
-LED GREEN : Your chip is correctly flashed
-LED GREEN, Then RED, then GREEN : Your chip is making a reset
* 3 capacitors values 270pF, 330pF, 390pF
* Optimised Wire position on Slim and FAT
* Compatibility of the XENON mothernoard revision (Warning only for Xell, Freeboot not compatible)
* Only 6 wires to solder on SLIM, 5 on FAT (No more B Point needed)
* Port JTAG and pin header provided for an easy flash process
* 6 Timings Configurations available directly on the chip for Slims
* Timings pads also available if Configurations pads are not enough
* Double Nand Feature : You can unactive the chip with the "Command Signal" from your double nand addon
* You can specify which nand is used for the glitch. I for internal, E for external
* precut wires provided with the chip
Reminder, today the RGH is compatible with :
* Xenon only for Xell up to kernel 14699
* Zephyr, Falcon, Jasper, JasperBB on Xell/Freeboot up to Kernel 14699 (Version CB Stage 2 available soon)
* Trinity on Xell/Freeboot whatever is the kernel version
* Corona on Xell/Freeboot whatever is the kernel version when the software part of the hack will be released. JED + Build.py... Soon :-)
For Corona v2 (Physon Chip), a new SPI version will be needed in order to dump the nand correctly.
Consult our new install documentation for the version 2 of the x360Glitchip
Today, 360gcProg is now under version 1.4 and brings you the Xenon Timing for RGH.
This one is compatible with all v2 revisions of the x360Glitchip. (Also compatible with older versions but needs hardware modifications)
Official Site: http://www.x360glitchip.com
Download: here
View the full article
Quote
We are proud to tell you that the x360Glitchip v2 is ready to be sold.
* 2 LEDs :
-LED RED : Your chip is empty
-LED Strong RED : Your chip is flashed with Xenon timing
-LED GREEN : Your chip is correctly flashed
-LED GREEN, Then RED, then GREEN : Your chip is making a reset
* 3 capacitors values 270pF, 330pF, 390pF
* Optimised Wire position on Slim and FAT
* Compatibility of the XENON mothernoard revision (Warning only for Xell, Freeboot not compatible)
* Only 6 wires to solder on SLIM, 5 on FAT (No more B Point needed)
* Port JTAG and pin header provided for an easy flash process
* 6 Timings Configurations available directly on the chip for Slims
* Timings pads also available if Configurations pads are not enough
* Double Nand Feature : You can unactive the chip with the "Command Signal" from your double nand addon
* You can specify which nand is used for the glitch. I for internal, E for external
* precut wires provided with the chip
Reminder, today the RGH is compatible with :
* Xenon only for Xell up to kernel 14699
* Zephyr, Falcon, Jasper, JasperBB on Xell/Freeboot up to Kernel 14699 (Version CB Stage 2 available soon)
* Trinity on Xell/Freeboot whatever is the kernel version
* Corona on Xell/Freeboot whatever is the kernel version when the software part of the hack will be released. JED + Build.py... Soon :-)
For Corona v2 (Physon Chip), a new SPI version will be needed in order to dump the nand correctly.
Consult our new install documentation for the version 2 of the x360Glitchip
Today, 360gcProg is now under version 1.4 and brings you the Xenon Timing for RGH.
This one is compatible with all v2 revisions of the x360Glitchip. (Also compatible with older versions but needs hardware modifications)
Download: here
View the full article
xk3y firmware v1.20
20 March 2012 - 09:00 PM
From xk3y.com:
Firmware 1.20 is now officially released, this firmware have been available as "beta" since January.
Some highlights are support for the DVD Menu system that where already added back in early February.
More about the DVD Menu system can be found over at x360keyforum.com
Complete release notes for firmware 1.20 please read the readme_01.20.txt file.
Official Site: http://xk3y.com
Download: here
View the full article
Quote
Firmware 1.20 is now officially released, this firmware have been available as "beta" since January.
Some highlights are support for the DVD Menu system that where already added back in early February.
More about the DVD Menu system can be found over at x360keyforum.com
Complete release notes for firmware 1.20 please read the readme_01.20.txt file.
Official Site: http://xk3y.com
Download: here
View the full article
XNand Healer GUI v0.77
20 March 2012 - 09:00 PM
TingedAce released a new version of XNand Healer GUI - a GUI app to help you dump and manage NAND files, remap bad blocks and also uncripple your Xbox 360.
What's new/fixed:
- Supports Multibuilder 09x that uses build.exe instead of python script
- Includes legacy support for Multibuilder 08x
- Supports Xenon ecc creation CB 1940 and 7375 (Credits to Team-Xecuter)
- Added GUI feature to let you choose which of the two Xenon CBs to flash to the console
- Supports Xenon full image creation
- Supports 13604/14699/14719 glitch/retail images and dashlaunch 2.32 (in conjunction with Multibuilder 0.921)
- Fixed: error generated if trying to build without a launch.ini file
Official Site: http://www.rigid360.co.uk
Download: here
View the full article
What's new/fixed:
- Supports Multibuilder 09x that uses build.exe instead of python script
- Includes legacy support for Multibuilder 08x
- Supports Xenon ecc creation CB 1940 and 7375 (Credits to Team-Xecuter)
- Added GUI feature to let you choose which of the two Xenon CBs to flash to the console
- Supports Xenon full image creation
- Supports 13604/14699/14719 glitch/retail images and dashlaunch 2.32 (in conjunction with Multibuilder 0.921)
- Fixed: error generated if trying to build without a launch.ini file
Official Site: http://www.rigid360.co.uk
Download: here
View the full article
AutoGG v0.2.11
11 March 2012 - 04:34 PM
blaKCat released AutoGG v0.2.11:
The AutogGG is a program that helps you to:
- Read the Nand of the Xbox. Autodetect the model.
- Generate Nand to load Xell in console to obtain Cpukey.
- Once you have CpuKey.Generate Jtag / rgh (Glitch) / Retail, images
- Flash generated Nand through programmer (LPT/USB) or software (Xell or Dash)
What's new/fixed:
- Added ECC/Glitch for Xenon
- Added ECC/Glitch updated Slim without previous Cpukey
- Added DashLaunch 2.32
Official Site/Download: elotrolado.net
View the full article
Quote
The AutogGG is a program that helps you to:
- Read the Nand of the Xbox. Autodetect the model.
- Generate Nand to load Xell in console to obtain Cpukey.
- Once you have CpuKey.Generate Jtag / rgh (Glitch) / Retail, images
- Flash generated Nand through programmer (LPT/USB) or software (Xell or Dash)
What's new/fixed:
- Added ECC/Glitch for Xenon
- Added ECC/Glitch updated Slim without previous Cpukey
- Added DashLaunch 2.32
Official Site/Download: elotrolado.net
View the full article
