How to jailbreak 3.0 firmware
By REDSTAR 105 of iBotmodz.net
+Rep if you think this is a huge breakthrough!
Steps:
- Make sure you have the 3.0 firmware on your iPod/iPhone before you do this, if you don't know how, then look at this tutorial, Link, Make sure you keep the firmware!!!
- Then download Redsn0w at the bottom of this page.
- Once done, open it, click browse and look for the EXACT firmware you restored with.
- Once loaded, click next and make sure Cydia is checked! Then click next.
- Now, plug your iPod/iPhone in and then hold the power button until the 'Slide to Shutdown' comes up and shut it down, and wait about 10 seconds.
- Okay, now get ready, click next and hold the power button for 3 seconds, then without letting it go, hold the power button for 10 seconds, and then let go of the power button and wait until the download screen pops up in Redsn0w.
- Now just set your iPod/iPhone down and let it do the work until it gets rebooted!
- You can unlock your iPhone (not 3g/s) with redsn0w.
- The windows version is accessible with vista.
- The mac version only works with intels.
- If you want to re-sync your cracked apps on your 3.0 firmware, go into cydia and add 'cydia.hackulo.us' as a source. Then go to Sections>Hackulo>'AppSync for OS 3.0' and install it. Now you may now sync cracked apps on your 3.0 iPod/iPhone.
�©2009 by REDSTAR 105 of iBotModz.net
Please click the green plus sign down there!
Edited by REDSTAR 105, 13 August 2009 - 12:45 AM.