While doing so I was looking at the previous thread and was thinking about redoing the whole light configuration.
Now it is neater and evenly spaced. ENJOY!!!
Rules
- Just do not troll or flame me about my work.
- Please enjoy this work.
- If you have other remarks just give me a pm
----------
L.E.D's un-lit just wanted to show you how there organized.
Picture#2
----------
L.E.D's are lit-up and this thing is BRIGHT!
Picture#3
----------
I did some wire management and shortened the wiring. Also compressed it with heatshrink.
Picture#4
----------
I added some quick releases on my rocker switch so that I can easily disconnect the wiring instead of un-soldering.
Picture#5
----------
A shot with all the stuff connected.
Picture#6
----------
A side angle shot of my tray cover that I cut.
Picture#7
----------
A more "clear" view of the tray cover
Picture#8
----------
A device I engineered for the magnet to still have its effect on the rotating disk inside the disk drive.
Picture#9
----------
I chopped up my fan shroud to make room for the LED wires but I'll be getting a clear tube soon.
Picture#10
-----------
How I soldered the wires. I know its messy.
Picture#11
-----------
A top view of my Xbox with the added in features.
Picture#12
-----------
My Xbox HDD cut by me with some tin-snips.
Picture#13
-----------
My HDD at a better glance.
Picture#14
-----------
Well I put acrylic in the HDD so why not Blue LED's?
Picture#15
-----------
WOOT my Whisper Fans finally came in after a week of waiting.
Picture#16
-----------
This is what the whisper fans look like un-packaged
Picture#17
-----------
Here is what they look like in my Xbox.
Video#1
--------
This is a video showing how my disk drive works.
Video#2
---------
I have everything put together and me and my friend are going to play some Halo 3.
Video#3
---------
All the new stuff is added and here is a video of it.
Edited by USSR, 31 May 2009 - 02:34 PM.